Help on choosing next project

I am more than halfway through Dacapo and in love with Falkenberg. I have been looking at other kits and have several questions. I am a hefty hourglass figure----I usually like swing jackets. I have been looking at Mermaid, Ballerina, and Gloria.

Mermaid and Ballerina seem to have some characteristics in common although Mermaid seems more fitted. Has anyone done both and have opinions on the pros and cons of each of them? Also, on cucumberpatch.co.uk for several of the projects it describes the yarn as 2 ply but knit as 4 ply. Does this mean the projects are knit with two strands? Looking at ravelry for these projects there seems to be a wide range of needle sizes used and i haven't been able to figure out if it is one strand or two of yarn.

I actually like small needles and fine gauge and have been quite happy with Dacapo, although I could see that for larger projects, one might want the fabric to have more heft.

Finally, I am not sure I have gotten the tension right on the self icord on my Dacapo--esp in the striped section. I was so worried that it would be too loose that I fear that I may have knit it too tightly. It does not pull, but it is considerably less stretchy than the rest of the fabric. I have not finished putting it together or blocking so that might change as well.

Thanks for any help.
Sandy

Mermaid #4

I started the body after the collar decrease with a provisional cast-on. I knit the rest of the body until the same place (I can check later and tell you precisely the start if anyone needs it) then picked up the stitches along the neck (instead of sewing the collar on later) and then picked up the front stitches from the provisional cast-on.

As you can see, I revised the collar as well, because I've not been happy with the collars, they tend to flip up instead of staying flat. So I went into SweaterWizard and used the information from that program to make a shawl collar. I knew I had more than enough yarn from the kit to do this.

Another long car trip provided the time/inclination/whatever to do the i-cord edging. (I hate i-cord, I really do!)

I just popped this in the mail for the Intended Victim (she is going to have to sew in the arms and the shoulder seams -- I was going to do it for her and realized that all of my pins are packed for moving.) This is Color #5, kingfisher, cypress and black.

Knitting Jazz Design

Hi Hanne Fans-

I am new to the blog, having just purchased my first kit, the Jazz sweater. I haven't seen that many posts about Jazz, so I thought I'd introduce myself and bring other Jazz knitters out of the woodwork.

Status on the sweater: I started swatching with a 3.0mm needle last week, and the gauge was off, so now I'm going to try a 3.5mm (US 4), but haven't started that swatch yet.

Cheers-
Tracy Hoover (aka Gamba Girl)

Another Studio Long Questions from New Member

Hello all,

I am knitting my first H.Falkenberg...and I seem to a a little stuck. Would anyone be able to help me? Many thanks in advance in any case.

I am joining triangle Z to the side panel. I have slipped the small triangle stitches over the the main needle.The instructions say: With B beg at (1) from RS; k1, sl2 B(=the 3 edge-sts), sl 2 knitwise, k1 etc

confusion: what does sl2 B mean?

I don't want to move forward on this sweater until I resolve this latest challenge.

Thank you.

Cate in California

Studio Long Question

I am confused about the ridge count. When you divide the work for the neck, you have done 72, 78, 81 or 87 ridges. In all cases they are a multiple of 3 and so I understood that you ended with 2 A ridges and started the neck divide with a B ridge. Is that correct or should I have ended with 1 A ridge and started the neck divide with the second A ridge?

Then you do either 22 or 25 ridges from the split. The last ridge would then be a B ridge if you started with a B ridge, but the instructions indicate that you are ending with 2 A ridges. The only thing I can think of is that the cast on and first row (in A) count as the first ridge and so when you split for the neck you end with the first ridge in A and the first split row is the second A ridge? IS that right?

When you knit together the back piece and the front piece stitches are you knitting together a B ridge, a first A ridge, or a second A ridge? I guess that is the most important question I have.

Gloria jacket

I am working on the Gloria jacket and am excited to see it start to take shape. The directions are not so clear...but I think I am managing. Is anyone else working on the Gloria?

Ping Pong

Greetings, I'm new to this blog but relatively 'old' with Hanne Falkenberg.
I've make two mermaid jackets - the second using a Rowan yarn with exactly the same weight as that provided in the kit, I just picked out my own colors.
I'm currently completing the Ping Pong jacket, sans bobbles. I loved the shape of the jacket, but the bobbles are huge, and after testing them on a swatch, I decided that one wouldn't want to sit down wearing a garment with that many lumps on it. (And the possibility of looking something like a colorful Michelin Man, did not appeal.)
Regarding the HF patterns, I've often wondered whether there is a site that lists corrections to pattern errors - it has there never been such a case?

Plisse Along

A group of us on the Hanne Falkenberg board on Ravelry have decided to start Plisse on July 1. That gives us time to get the kits, start our swatches and...

Some of us plan to write about it here as well as on Ravelry. But we are hoping that interested people will join in on either or both places.

I'm waiting on the current Mermaid for correct sleeve length of the intended victim. I love knitting her pattern!

Gloria

I'm very pleased with the way my Gloria turned out. I'm a size 12 U.S. and made the M/L size. The style is sort of long in the back, but just right in front.

I need to get a picture of her on a body,but in the meantime, here she is. I've worn her pinned and unpinned and like her both ways, but I have this idea to put in a hidden hook and eye (one like they use on fur coats - heavy and wrapped in silk) to bring the two front sides together with the lapel turned back all the way down the front. I think she's going to look terrific that way! I know wrapped styles are supposed to be slimming, but she just feels unnecessarily bulky over my already bulkiest part when wrapped! (She looks just fine unfastened.)

My one big suggestion is to use a sewn bind-off. I almost didn't until I realized that I could use spit-splices to avoid the lumpiness my normal technique for joining in (two stitches with both the new and the old strand) would cause. It worked beautifully. The edge is totally stretchy and looks more like a cast-on edge than a bound off edge. I am totally incapable of binding off without the edge getting too tight, so this was a real breakthrough!

Oh yeah, my other big suggestion is to use spit splices all the way through. Duh. They work great with this yarn, and I would have avoided what seemed like hours of end-weaving!

JudiP53 (same ID on Ravelry, where there's a little more detail)

Addendum: Commenters asked about the spit splice and the sewn bind-off. I only used the spit splice during the bind-off, which is done all in one color. To do it, just lick your palms, then place the ends (helps if they were pulled to break instead of cut with scissors) overlapping between your hands and rub fast to create heat and friction. Add spit if needed and keep rubbing until both ends are nicely incorporated into the strand. Virtually invisible and absolutely no ends to weave in. Just wish I'd thought of doing it during the knitting of the rest of the sweater. I had to do LOTS of end weaving! The splice only works when joining the same color. There will still be the need to weave in ends where new colors are joined at the selvedges.

As to the comment about the yarn getting too worn with the sewn bind-off, I didn't have that problem at all. I avoided it by only working with a modest length of yarn, spit splicing as needed to go around that long, long, long stretch of collar, fronts and bottom. I used a double-strand to bind off (the solid band around the edge is knitted with a double strand of yarn) and I did make a point not to splice both strands in the same place. It worked great -- looks fantastic and I feel confident no excessive wear and tear on the yarn.

Be sure to check the comments for a description and link to a blog with more description and photos of Hanne's visit to a Dutch yarn shop. Sounds like she charmed everyone!

Plisse

Hi All

This is my first time posting. I am having trouble with an instruction on this one and wondered if somebody could help?

Thanks

Suz

Woohoo!!

Woohooo..when I got home today...I checked my email, the vendor where I purchased the mermaid kit emailed me back and advised that she had mailed me the pattern...cant wait!!

So thankful!!

Thanks for letting me join.

I am doing the mermaid sweater or I will be once I hopefully get my pattern replace. This was the 2nd try at the sweater. I was recently on my way to my Mom's to show her the progress on my Son's sweater so I packed up my knitting bag and my binder...got to my Mom's and only took the bag in. Had a very nice visit with my Mom...went to leave....and OMG my car had been stolen along with my knitting binder. I am sure the binder is not what they wanted but that was one of my first thoughts....OMG I will never be able to replace the patterns that I had in that binder......the car can be replace but MY BINDER!!! So I have contacted the vendor that sold the kit to me and hopefully I will get a response...I need to get the pattern replaced so I can continue this sweater...so keep your fingers crossed for me!!

Krista

Knitalong moderator note: All, please remember that the Hannealong is not the appropriate site to give anyone a pattern. Although I'm sure we sympathize with the situation of many who need/want a copy of the pattern without the kit for whatever reason, whether it's a story such as the above or allergies to wool or anything else, unfortunately we cannot allow that here for legal reasons. I have advised Krista to contact her vendor as they will have proof of her purchase. Thanks for keeping the Hannealong legal so that it may continue to be a resource to many!

Ready to seam my Mermaid

I am about ready to start seaming my Mermaid and I need some help. I have googled the Internet, gone through my books and DVD's but cannot find any information on how to seam garter stitch that was knit vertically (ie, the Mermaid sleeves). How did the rest of you seam the sleeves? I know that some did a three needle bind off rather than binding off the edges but I didn't.

Thanks,
Ricki

Mermaid Help Needed

I'm confused about the directions for the shoulder edge. The directions say "work edge stitches along shoulder similar to the edge along the lower edge of the jacket". This seems to mean that the edge stitches and shoulder stitches are worked the same although when I do this, the shoulder edge doesn't look right.
I'm stopped - although I guess I will go on to a sleeve while I'm waiting for an answer from a Mermaid expert.
Gayle

Plisse - decreasing for sleeve !

I have learned so much just reading all your posts ... what beautiful projects! Last summer I went to Copenhagen ! I purchased "Plisse" in Raspberry and finally got brave enough to cast on. I am really enjoying knitting this sweater. I am stuck on the sleeve decrease. ( I am making size large. )

165 stitches needles ...

Cast off 3 sts in each side 4 times - does this mean that I will decrease 12 sts ? or 24 sts?

Then 2 sts in each side 3 times - decrease of 6 (right side/wrong side) or 12 (beginning of row, end of row) ?

This is where I stopped ... I am thinking I should have bound off at the beginning and end of each row ... but I bound off "each side" as wrong side, right side ... so I have 147 sts on my needles .. but I should have .... 129 sts (147 - 18 = 129 ) I think ....

Now decrease 1 st in each side on every RS row ... repeat these 2 rows 3 times - decrease 3 ?

Continue edge sts but dec only on every 2nd RS row (= every 4 row ) 15 times - decrease 15 ?

I am supposed to end up with 93 sts ... but doing the math with the higher number of decreases in the bind off rows ... I still get 111 stitches (Math is NOT my talent)

Has anyone made Plisse that can help? Or do you have lots of Hanne experience, can you guide me with these instructions?

Tutti-Frutti for a Little Boy

Way too big for him right now, but it won't be long. A great pattern to knit for an infant/child!

Help with Studio needed

Help!

This is the second time that I am going to rip this out. Curses. I love this sweater but I want to do it right.

I made my mistake when I approached CstXX —– I knit to one stitch before the marker. Then I slipped the one stitch before the marker and the one stitch after the marker as if to knit. Then I knit one and passed the two slipped stitches over the knit stitch and put the marker back on. —– I lost my angle— It disappeared.

Can someone please straighten me out? Perhaps it will be ready for next winter,

Thank you

Tess

Promenade is complete

I finally managed to complete Promenade - took me a while due to trips away and other commitments but I did get there eventually. The shawl loosened and softened beautifully when washed in warm, soapy water and then rinsed with fabric conditioner. It had its first outing this morning to a pretty chilly church where I was leading worship - kept me very warm and kept my hands free for playing guitar. Always handy...

Sorry these photos aren't of Promenade being modelled on a real person. My husband is rarely around when it's good light and I wanted to capture the colours in sunshine to show them at their magnificent best.

Not sure what's next. I have a few more HF kits stored in my cupboard - Tivoli, Ping Pong, Diva and I'm sure I'll do another Mermaid - but I may have a break and do something which grows a little more quickly (and with somewhat shorter rows than Promenade!)

MERMAID ISSUES

Good day ladies

I have just become an HF follower. I bought the Mermaid design on Friday last week and have just knitted the first flaired piece. I am however, concerned because the pattern does not ask for decreasing anymore over the shoulder! Should I be decreasing somewhere still? I am knitting the large design. I have also contacted Amy for the spreadsheet as I have been working off my own charts - making these before I attack each section - but this slant issue is troubling me.

Tutti-Frutti

I'm playing with Tutti-Frutti, changing it for a baby boy instead of a baby girl. I'm about half-way down the back, then will do the sleeve ends, neck bands, seams and sew in the ends. I'm toying with the idea of a small gusset along the side/arm seams, in the black. Thoughts?